EnigMat PCM Blanket
Flexible phase-change blankets that absorb peak heat and release it overnight. Installs over existing decking, joists, and rack tops with standard fasteners.
Passive thermal architecture for industrial scale.
Engineered phase-change blankets for the next generation of climate-controlled infrastructure. Cut HVAC energy 15–30%.
Self-storage roof retrofit — Florida deployment, 2025. PCM blankets installed over standing-seam roof bays.
Two Products · One Technology
What we make
Both products use the same phase-change core. Choose the blanket for surfaces and cavities, the strip for steel framing — or order both on one request.
EnigMat Cool Stud
A thin PCM strip bonded to the steel stud web. Cuts peak load through the bridge, shifts thermal load 2–6 hours, and stabilizes interior surface temperatures.
4″, 6″, and 8″ widths available by special order.
How It Works
The Technology
Thermal Inertia
A proprietary molecular matrix absorbs latent heat during peak demand and releases it overnight, stabilizing internal climates without mechanical load.
Economic Scale
Reduces HVAC overhead by 15–30% through passive energy displacement. Proven in Minnesota field studies and Northeast data center deployments.
Retrofit Ready
Flexible 12" × 48" blankets install over existing ceilings, racks, walls, and containers with standard mechanical fasteners. No downtime.
Field Installation
Installation Guide
Four steps, standard fasteners, no downtime. A typical 1,200 ft retrofit is completed by a two-person crew in a single shift.
Tools required
Tape measure · utility knife · cordless driver · #8 screws or 11″ cable ties
Crew & time
2 installers · ~150 ft / hour · no specialty trades or shutdown
Product 02 · Steel Framing
EnigMat Cool Stud
Dynamic thermal bridge protection for steel framing.
The problem
Steel studs create significant thermal bridges. Those bridges can cut the effective R-value of cavity insulation by 40–70%, raise peak heating and cooling loads, and increase the risk of condensation at the stud–drywall interface.
The solution
Cool Stud is a thin phase-change strip applied directly to the steel stud web. It absorbs and releases latent heat at a controlled temperature — reducing peak heat flow, shifting thermal loads by 2–6 hours, and stabilizing interior surface temperatures through daily cycles.
Key benefits
- · Reduces peak heating and cooling loads
- · Lowers condensation risk at the stud–drywall interface
- · Improves comfort by flattening daily temperature swings
- · Delivers performance closer to continuous insulation with minimal added wall thickness
- · Class A fire rating (ASTM E84) with durable, fastener-resistant encapsulation
Available widths
4"6"8"
Stock widths and custom sizes available through special order — note your stud depth and gauge in the order request.
How it compares
FeatureTraditional thermal breakEnigMat Cool Stud
Peak load reductionTraditional:LimitedCool Stud:Significant
Load shiftingTraditional:NoneCool Stud:2–6 hours
Condensation controlTraditional:Higher riskCool Stud:Substantially improved
Wall thickness impactTraditional:Often requires extra CICool Stud:Minimal
Easy integration
Compatible with standard steel-stud production and job-site assembly. High-shear adhesion and protected encapsulation require no major process changes.
EnigMat PCM Blanket
A heat barrier for walls, ceilings, and attics
EnigMat PCM Blankets turn the building envelope of homes and commercial buildings into a passive climate-control layer. The phase-change core absorbs peak heat during the day, holds it while it changes state, then releases it after conditions cool — flattening indoor temperature swings and cutting the runtime your HVAC needs to keep up.
Walls
Applied behind drywall or over sheathing on exterior walls, the blanket buffers solar gain through the wall assembly and steadies interior surface temperatures room by room.
Ceilings
Laid above ceiling joists or fixed to the ceiling plane, it slows the downward heat push from hot roof cavities so upper floors stop overheating in the afternoon.
Attics
Rolled over attic insulation and around ductwork, it cuts attic peak temperatures and protects duct runs, one of the biggest sources of wasted cooling in a home.
Climate control that saves energy year-round
Fewer compressor starts, shorter cooling cycles, and a 2–6 hour thermal lag that shifts load away from peak-rate hours. Works alongside existing batt, blown, or spray-foam insulation — it complements R-value instead of replacing it.
Price It · Then Request Your Order
Project Quantities
Pick a product, enter your footage, and send the request. We confirm the final quote — including shipping and tax — before anything is charged.
Step 1 · Choose your product
1 linear foot = one 12" × 48" blanket
Volume Pricing
10% off
100+ ft
15% off
500+ ft
Shipping & tax confirmed with your quote
Applications
Hyperscale rack containment
Data InfrastructureData Center Operations
Buffer cooling failure risks and lower PUE in high-density racks.
Read the data center guideResidential blanket delivery and installation
ResidentialHome & Light Commercial
Stabilize attic temperatures and cut cooling loads in homes, outbuildings, and small offices.
Warehouse envelope retrofit — field footage
CommercialBuilding Envelopes
Reduce peak demand charges in commercial HVAC configurations.
Reefer trailer thermal lining
Logistics NetworksCold Chain Containment
Extend thermal integrity for sensitive cargo during transit.
Utility Incentive Eligible
Qualify for regional rebates & incentives.
Thermafaze installations qualify for Xcel DTS, Mass Save, Con Edison CSRP, and most regional efficiency programs across the US Northeast and Midwest.
Xcel EnergyDTS Efficiency Program
Mass SaveCommercial Custom Rebate
Con EdisonCSRP Load Relief
Buyer Questions
Frequently Asked
Still have questions? Email our team — most replies within one business day.